If we observe carefully, it is not difficult to find that there is a certain distance between solar street lights. And the distance between the two street lights is still the same length. How to adjust the installation distance of solar street lights correctly, so that solar street lights can be used to the fullest?
Under normal circumstances, the jacket of the solar battery pack is 2*2.5mm2. The light-duty sheath is 2 * 1.5mm2, and the length of the sheath line is determined. There should be enough margin at the connecting end of the solar cell module sheath wire with the solar cell module, one end must be the bottom surface of the flange, and the light source sheath line should have enough margin at the connecting end to connect to the light source, and the other end must be long and long. The bottom of the flange.
Solar street light manufacturers
The height of the pole of the solar street light is usually determined according to the width of the road. The width of the road for new rural construction is generally about 5 meters, the height of the pole can be between 4-6 meters, and the power range of the light source is between 20-40 watts. The range of solar street lights should not be less than 15 meters. If it is a wide two-way lane, generally more than 10 meters wide, you can use a light pole with a height of 8 meters, and the power of the light source is about 40 watts: solar street lights are installed at a distance of 8 meters, and solar street lights with 8 meters are installed in the new rural area. On the road. In fact, there are quite a lot of them. Most customers will choose to install solar street lights of 5-7 meters, and the installation spacing is about 10-15.
Solar street light manufacturers
2: 7-meter solar street lights installation spacing, generally choose 6-7 meters solar street lights, when the road is 7 meters wide, when installing 7-meter solar street lights, the general spacing should be kept at 20-25 meters, especially in the corners. Solar street light, so that it will not affect part of the lighting.
3: 12-meter solar street lamp installation spacing, the inside and outside of the poles must be hot-dip galvanized, so that it will be safer. For this installation distance, it is recommended that the 12-meter solar street lamp has a distance of 30-50 meters and a width of more than 15 meters. The higher the pole, the better the choice of light source, and the configuration should be slightly higher.
The above is the solar street lamp manufacturer, and I will share with you about the spacing of solar street lamp installation. I hope that through the above content, we can help people in need.
