During the installation of solar street lights, the operator must implement the fixed requirements for the sample amount. The source code reminds that it is critical to prepare the line during installation. You need to refer to the street light packing box to select the appropriate sheath line. Generally, the solar battery pack sheath is 2*2.5mm2. Choose 2*1.5mm2 for the light sheath, and determine the length of the sheath line. The sheath wire of the solar cell module must have enough margin at the connection end of the solar cell module, and the other end must be connected to the bottom of the flange. The sheath wire of the light source must have enough margin at the connection end of the light source. The other end must be as long as the bottom of the flange. The height of the poles of solar street lights is generally determined according to the width of the road. The width of the road surface for new rural construction is generally about 5 meters, the height of the poles can be 4-6 meters, and the power range of the light source is within 20-40 watts, which can be determined. The illumination range of the solar street light should not be less than 15 meters. If it is a relatively wide two-way lane, the width is generally more than 10 meters, and a light pole with a height of 8 meters can be used, and the power of the light source is about 40 watts.
1: 8m solar street light installation spacing. If 8m solar street lights are installed on the roads of the new countryside, there are actually relatively few. Most customers will choose to install 5-7m solar street lights, and the installation spacing is 10- Around 15 will do.
2: 7-meter solar street lights installation spacing, generally 6-7 meters solar street lights, when the road is 7 meters wide, if you install 7-meter solar street lights, the general spacing should be maintained at about 20-25 meters, especially in An extra solar street light should be installed at the corner so that it will not affect part of the lighting.
3: 12m solar street lamp installation spacing, the pole must be hot-dip galvanized inside and outside, so that it will be safer. As for the installation distance, the recommended distance for 12-meter solar street lights is 30-50 meters, and the width needs to exceed 15 meters. The higher the pole, the better the light source should be selected, and the configuration should be slightly higher.
